
A mess was there, but cleared out |

Now it is clean |

This is a problem. Eave is falling down |

There was a hole, soIremoved the board |

This board was very rotten |

So I removed it |

Before there were spider webs under the eaves |

What it looks like after cleaning |

1x7 will fit here |

1x6 will fit nicely here |

1x7 (old) will fit, but I will buy a new one |

1x6 will fit here |

another 1x6 will fit here |

The last 1x6 will go here |
 |
 |
 |

Veda helping |

Board with hook as reinforcement |

|

Corner metal fixed |

tools |

|

First snow |
 |

Cutting wood at a 45 degree angle for more support |

Wood fits nicely together |

Then screw down |

special cut |

A note to the future left inside |

Snow melted |

Wood section fixed |

Ice and water shield ready to roll |

First shingle on east roof |

more shingles and red foot board brace |

Put 2.5 tab shingle at right edge, never .5 tab |

Then put a 1' tab shingle on the left towards mid roof |

No more hitting fingers, using yellow tweezer |

Stepping up by 5 course rows |

Ladder based shingle lifter |